Distance sensor VDM35-30-R/20/105/122
- Can be aligned using an integrated pilot laser
- Adjustable switch outputs
- Not sensitive to ambient light
- Analog output 4 mA ... 20 mA
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Scarica il Datasheet completo in formato PDF:
Estratto del Datasheet: Dati tecnici del VDM35-30-R/20/105/122
| Descrizione prodotto |
|---|
| Universal distance sensor, measurement to reflector, 30 m detection range, red laser light, laser class 2, 2 x PNP outputs, analog output, M12 plug |
| General specifications | ||
|---|---|---|
| Measurement range | 0.2 ... 30 m | |
| Reference target | OFR-100/100 | |
| Light source | laser diode | |
| Light type | modulated visible red light modulated infrared light |
|
| Laser nominal ratings | ||
| Note | VISIBLE AND INVISIBLE LASER RADIATION , DO NOT STARE INTO BEAM | |
| Laser class | Measuring laser: 1 Alignment laser: 2 |
|
| Wave length | Measuring laser: 905 nm Alignment laser: 650 nm |
|
| Beam divergence | Measuring laser: 2 mrad Alignment laser: 1 mrad | |
| Pulse length | Measuring laser: 6 ns Alignment laser: 0.25 µs | |
| Repetition rate | Measuring laser: 40 kHz Alignment laser: 1 kHz | |
| Maximum optical power output | Measuring laser: 1.8 W Alignment laser: 3 mW | |
| Measuring method | Time of flight measurement | |
| Diameter of the light spot | 45 mm x 60 mm at a distance of 30 m | |
| Ambient light limit | 5000 Lux | |
| Temperature influence | analog typ. 0.1 °/oo/K, switching output typ. 0.05 °/oo/K | |
| Indicators/operating means | ||
| Operation indicator | LED green | |
| Function indicator | LED yellow: switching state (2x) , LED orange : Operating mode | |
| Control elements | Control panel : Adjuster for switch point , Operating mode , Analog output ( S - Set , T - Toggle ) | |
| Parameterization indicator | LED red (4x) | |
| Electrical specifications | ||
| Operating voltage | 18 ... 30 V DC , class 2 | |
| Ripple | 10 % within the supply tolerance | |
| No-load supply current | ≤ 125 mA / 24 V DC | |
| Time delay before availability | ≤ 300 ms | |
| Output | ||
| Switching type | light/dark on, switchable | |
| Signal output | 2 PNP, short-circuit protected | |
| Switching current | max. 100 mA | |
| Measurement output | 1 analog output 4 ... 20 mA, short-circuit/overload protected , Rmax = 500 Ohm | |
| Voltage drop | ≤ 2.4 V | |
| Deviation of the characteristic curve | typ. ≤ ± 60 mm | |
| Switching frequency | Fast: 17 Hz / Slow: 8 Hz | |
| Response time | Fast: 30 ms / Slow: 65 ms | |
| Repeat accuracy | Fast: typ. ≤ ± 10 mm / Slow: typ. ≤ ± 5 mm | |
| Compliance with standards and directives | ||
| Directive conformity | ||
| EMC Directive 2004/108/EC | EN 60947-5-2 | |
| Standard conformity | ||
| Laser class | IEC 60825-1:2007 | |
| Approvals and certificates | ||
| Approvals | CE, cULus | |
| Ambient conditions | ||
| Ambient temperature | -10 ... 50 °C (14 ... 122 °F) | |
| Storage temperature | -40 ... 80 °C (-40 ... 176 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection | 5-pin, M12 x 1 connector | |
| Material | ||
| Housing | ABS | |
| Optical face | PMMA | |
| Mass | 200 g | |
| Dimensions | ||
| Height | 93 mm | |
| Width | 95 mm | |
| Depth | 42 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270916 |
| ECLASS 12.0 | 27270916 |
| ECLASS 11.0 | 27270801 |
| ECLASS 10.0.1 | 27270801 |
| ECLASS 9.0 | 27270801 |
| ECLASS 8.0 | 27270801 |
| ECLASS 5.1 | 27270801 |
| ETIM 9.0 | EC001825 |
| ETIM 8.0 | EC001825 |
| ETIM 7.0 | EC001825 |
| ETIM 6.0 | EC001825 |
| ETIM 5.0 | EC001825 |
| UNSPSC 12.1 | 41111613 |
Details: VDM35-30-R/20/105/122
Product Documentation: VDM35-30-R/20/105/122
| Brief Instructions | Lingua | File tipo | Dimensioni |
|---|---|---|---|
| Instruction leaflet / Beipackzettel | ALL | 1041 KB |
Design / Simulation: VDM35-30-R/20/105/122
| CAD | Lingua | File tipo | Dimensioni |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 1524 KB |
Approvals: VDM35-30-R/20/105/122
| Certificates | Certificato Numero | Lingua | File tipo | Dimensioni |
|---|---|---|---|---|
| Canada USA UL Ordinary Location | E87056 | ALL | LINK | --- |
| EU Pepperl+Fuchs | PF08CERT1244 | ALL | 503 KB |
Scopri i sensori SmartRunner, basati sulla combinazione unica della tecnologia a lama di luce e sensori ottici 2D con LED integrati …
La serie R2000 offre risultati di misurazione affidabili ed estremamente precisi, con una visione a 360° senza interruzioni ...
Misurazione in 3D o ad alta velocità: la serie R2300 offre il sensore LiDAR adatto ad ogni sfida. Scopri di più sui vantaggi, sulla tecnologia e sulle aree di applicazione ...
Per la prima volta, una vasta gamma di sensori fotoelettrici e tecnologie innovative si incontrano in un design di custodie standardizzato. Gli utenti beneficiano di un concetto operativo uniforme in tutta la gamma. Scopri le serie R100, R101, R103, R200 e R201...
Grazie a tecnologie all'avanguardia, i sensori di distanza offrono il massimo livello di precisione e affidabilità ...
Pepperl+Fuchs FA Italia Srl
Via Ornago 24
20882 Bellusco (MB)
Italia
P.IVA 05970540968
infofa@it.pepperl-fuchs.com
+39 039 69599 1
Pepperl+Fuchs srl
Via delle Arti e Mestieri, 4
20884 Sulbiate (MB)
Italia
P.IVA 02181770963
pa-info@it.pepperl-fuchs.com
+39 039 62921
Pepperl+Fuchs è leader mondiale nella tecnologia e nella produzione di sensori industriali e componenti elettronici per il mercato dell'automazione globale. Innovazione, crescita e qualità costante ne garantiscono il successo da oltre 70 anni. Pepperl+Fuchs impiega circa 6,300 persone in tutto il mondo ed ha siti produttivi a norma ISO 9001 in Germania, Stati Uniti, Singapore, Ungheria, Indonesia e Vietnam.