Read head WCS3A-LS2**
- Non-contact, absolute position encoder
- RS 485 interface
- Automatic detection of dirt accumulation
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Scarica il Datasheet completo in formato PDF:
Estratto del Datasheet: Dati tecnici del WCS3A-LS2**
| Descrizione prodotto |
|---|
| Read head, RS-485 interface, with RS-485 termination resistor |
| General specifications | ||
|---|---|---|
| Passage speed | ≤ 12.5 m/s | |
| Measuring range | max. 314.5 m | |
| Resolution | ± 0.4 mm (1,250 positions/m) | |
| Indicators/operating means | ||
| Operation indicator | LED green: power on | |
| Data flow indicator | LED yellow: data communication active | |
| Velocity indicator | LED yellow (only with Option S, speed output) off, if speed limit is exceeded (instead of data flow display) |
|
| Error indicator | LED red flashing: read head outside of code rail solid on: internal diagnostic test failed |
|
| Display | Display module, 6-digit (only with option D, display) adaptable to installation position |
|
| Electrical specifications | ||
| Operating voltage | 24 V DC, ± 20 % | |
| Power consumption | 2 VA with Option H, heating: 9 VA |
|
| Interface | ||
| Interface type | RS 485 interface | |
| Data output code | binary code | |
| Transfer rate | Baud rate 19.2 kBit/s ... 187.5 kBit/s (to be specified with order) | |
| Termination | with RS 485 termination | |
| Output | ||
| Output velocity | PNP. open collector, short-circuit protected low active (only with Option S, speed output) |
|
| Internal resistor | 470 Ω | |
| Switching voltage | 24 V DC | |
| Standard conformity | ||
| Electromagnetic compatibility | emitted interference to EN 50081-2 noise immunity to EN 50082-1 increased intensity level, evaluation criterion A |
|
| Ambient conditions | ||
| Operating temperature | 0 ... 60 °C (32 ... 140 °F) with Option H, heating: -40 ... 60 °C (-40 ... 140 °F) |
|
| Relative humidity | 90 % , noncondensing | |
| Mechanical specifications | ||
| Connection type | 9-pin Sub-D connector | |
| Cable diameter | 4.5 ... 7.5 mm | |
| Degree of protection | IP54 | |
| Material | ||
| Housing | Polyamide (PA) , Polycarbonate , ABS | |
| Mass | 500 g | |
| General information | ||
| Ordering information | Mounting plate and SUB-D cable socket (IP65) included with delivery | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270918 |
| ECLASS 12.0 | 27270918 |
| ECLASS 11.0 | 27270701 |
| ECLASS 10.0.1 | 27270701 |
| ECLASS 9.0 | 27270701 |
| ECLASS 8.0 | 27270701 |
| ECLASS 5.1 | 27270701 |
| ETIM 9.0 | EC001852 |
| ETIM 8.0 | EC001852 |
| ETIM 7.0 | EC001852 |
| ETIM 6.0 | EC001852 |
| ETIM 5.0 | EC001852 |
| UNSPSC 12.1 | 41111945 |
Details: WCS3A-LS2**
Product Documentation: WCS3A-LS2**
| Product information | Lingua | File tipo | Dimensioni |
|---|---|---|---|
| Setting of configuration switches / Einstellung der Konfigurationsschalter | ALL | 278 KB | |
| Manuals | |||
| Manual | ENG | 12338 KB | |
| Manual WCS Electrical | ENG | 4782 KB | |
Prodotti associati : WCS3A-LS2**
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
Pepperl+Fuchs FA Italia Srl
Via Ornago 24
20882 Bellusco (MB)
Italia
P.IVA 05970540968
infofa@it.pepperl-fuchs.com
+39 039 69599 1
Pepperl+Fuchs srl
Via delle Arti e Mestieri, 4
20884 Sulbiate (MB)
Italia
P.IVA 02181770963
pa-info@it.pepperl-fuchs.com
+39 039 62921
Pepperl+Fuchs è leader mondiale nella tecnologia e nella produzione di sensori industriali e componenti elettronici per il mercato dell'automazione globale. Innovazione, crescita e qualità costante ne garantiscono il successo da oltre 70 anni. Pepperl+Fuchs impiega circa 6,300 persone in tutto il mondo ed ha siti produttivi a norma ISO 9001 in Germania, Stati Uniti, Singapore, Ungheria, Indonesia e Vietnam.