Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Scarica il Datasheet completo in formato PDF:
Estratto del Datasheet: Dati tecnici del
VBG-PB-K20-DMD
| Descrizione prodotto |
| PROFIBUS Gateway, double master for 2 AS-Interface networks |
| General specifications |
| AS-Interface specification | V3.0 |
| PLC-Functionality | activateable |
| Duplicate address detection | from AS-Interface slaves |
| Earth fault detection | integrated |
| EMC monitoring | integrated |
| Diagnostics function | Extended function via display |
| UL File Number | E223772 |
| Functional safety related parameters |
| MTTFd | 80 a at 30 °C |
| Indicators/operating means |
| Display | Illuminated graphical LC display for addressing and error messages |
| LED PROFIBUS | PROFIBUS master detected; LED green |
| LED AS-i ACTIVE | AS-Interface operation normal; LED green |
| LED CONFIG ERR | configuration error; LED red |
| LED PRG ENABLE | autom. programming; LED green |
| LED POWER | voltage ON; LED green |
| LED PRJ MODE | projecting mode active; LED yellow |
| LED U AS-i | AS-Interface voltage; LED green |
| Switch SET | Selection and setting of a slave address |
| OK button | Mode selection traditional-graphical/confirmation |
| Button MODE | Mode selection PRJ-operation/save configuration/cursor |
| ESC button | Mode selection traditional-graphical/cancel |
| Electrical specifications |
| Insulation voltage | ≥ 500 V |
| Rated operating voltage | from AS-Interface |
| Rated operating current | approx. 200 mA from AS-Interface circuit 1
approx. 70 mA from AS-Interface segment 2 |
| Interface 1 |
| Interface type | RS-485 |
| Protocol | PROFIBUS DP V1 |
| Transfer rate | 9.6 kBit/s / 12 MBit/s , Automatic baud rate detection |
| Interface 2 |
| Interface type | RS 232, serial
Diagnostic Interface |
| Transfer rate | 19,2 kBit/s |
| Connection |
| PROFIBUS | Sub-D interface |
| AS-Interface | spring terminals, removable |
| Directive conformity |
| Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 62026-2:2013 |
| Standard conformity |
| Electromagnetic compatibility | EN 61326:2003 |
| Degree of protection | EN 60529:2000 |
| AS-Interface | EN 62026-2:2013 |
| Ambient conditions |
| Ambient temperature | 0 ... 55 °C (32 ... 131 °F) |
| Storage temperature | -15 ... 75 °C (5 ... 167 °F) |
| Mechanical specifications |
| Degree of protection | IP20 |
| Mass | 420 g |
| Dimensions | |
| Height | 120 mm |
| Width | 75 mm |
| Length | 76 mm |
| Construction type | Low profile housing , Stainless steel |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27242607 |
| ECLASS 12.0 | 27242607 |
| ECLASS 11.0 | 27242607 |
| ECLASS 10.0.1 | 27242607 |
| ECLASS 9.0 | 27242607 |
| ECLASS 8.0 | 27242607 |
| ECLASS 5.1 | 27242607 |
| ETIM 9.0 | EC001603 |
| ETIM 8.0 | EC001603 |
| ETIM 7.0 | EC001603 |
| ETIM 6.0 | EC001603 |
| ETIM 5.0 | EC001603 |
| UNSPSC 12.1 | 39121535 |
Details:
VBG-PB-K20-DMD
Product Documentation:
VBG-PB-K20-DMD
Design / Simulation:
VBG-PB-K20-DMD
Approvals:
VBG-PB-K20-DMD
Prodotti associati :
VBG-PB-K20-DMD
| Accessories |
|
|
|
| Full version of the AS-I Control Tools including connection cablefa |
|
|
|
|
| PROFIBUS master simulatorfa |
|
|
|
|
| Interface converter USB/RS 232fa |
|
|
|
|
| PROFIBUS Sub-D Connector with switchable terminal resistancefa |
|
+39 039 69599 1